User Manual Q&AAnswer
Dec 25, 2024 - 11:14 AM
To replace the batteries in the Tonka 6183 Construction Truck, please follow these steps:
1. Locate the battery compartment on the bottom or back of the truck. It is usually secured with a small xxxx or latch.
2. Use a screwdriver or your fingers to remove the xxxx or open the latch, depending on the type of closure used.
3. Open the battery compartment and remove the old batteries, if present. Make sure to dispose of them properly.
4. Insert two new AA batteries into the battery compartment, ensuring that the positive (+) and negative (-) ends are correctly aligned with the markings inside the compartment.
5. Close the battery compartment and secure it with the xxxx or latch.
6. Test the lights and sounds by turning on the truck. If the lights and sounds still do not work, double-check that the batteries are inserted correctly and that they are fresh.
If you continue to experience issues with the lights and sounds after replacing the batteries, it is possible that there may be another problem with the truck. In that case, refer to the troubleshooting section of the user manual or contact Basic Fun customer support for further assistance.
Add New Comment