User Manual Q&AAnswer
Dec 25, 2024 - 10:35 AM
To turn on the LED lights in the BSTAOFY Puppy LED Plush Toy, follow these steps:
1. Make sure the batteries are properly inserted into the battery compartment of the toy.
2. Locate the power switch on the toy. It is usually located on the side or back.
3. Press the power switch to turn on the LED lights. The lights should illuminate and start changing colors.
4. If the LED lights do not turn on, double-check that the batteries are inserted correctly and securely.
5. If the issue persists, try removing and reinserting the batteries to reset the toy.
6. If none of the above steps work, there may be a faulty switch or wiring. In this case, please contact the manufacturer, Bstaofy, for further assistance.
Note: The LED lights in the BSTAOFY Puppy LED Plush Toy have an automatic 15-minute timer. If the toy is left alone for 30 minutes, the lights will turn off automatically to save battery life. You can manually turn off the lights by pressing the power switch again.
Add New Comment