User Manual Q&AAnswer
Dec 25, 2024 - 10:27 AM
To turn on the LED lights in the BSTAOFY Dolphin LED Plush Toy, please follow these steps:
1. Locate the on/off switch: The switch is usually located on the underside of the toy, near the battery compartment.
2. Flip the switch to the "On" position: Slide the switch to the side or press it upwards, depending on the design of your toy. This should activate the LED lights.
3. Observe the color-changing feature: Once the LED lights are turned on, the dolphin will start changing colors and sparkling. The lights will alternate between different hues, creating a captivating visual display.
If the LED lights are not turning on, please check the following:
- Make sure the batteries are properly installed: Open the battery compartment, which is typically located on the underside of the toy. Ensure that the batteries are inserted correctly, aligning them with the polarity indicators.
- Replace the batteries if necessary: If the LED lights are still not working after checking the battery installation, try replacing the batteries with fresh ones. Weak or depleted batteries may not provide enough power for the lights to function properly.
If you have followed these steps and the LED lights are still not turning on, please refer to the troubleshooting section of the user manual or contact the manufacturer, , for further assistance.
Add New Comment