User Manual Q&AAnswer
Dec 25, 2024 - 10:25 AM
To charge the Hamourd SQN-008 Rechargeable Remote Control Robot, please follow these steps:
1. Unplug the charging cable from the robot's battery compartment if it is already connected.
2. Locate the charging port on the robot. It is usually located on the back or bottom of the robot.
3. Take the supplied charger and connect it to the charging port on the robot. Ensure that the connection is secure.
4. Plug the other end of the charger into a power source, such as a wall outlet or a USB port on a computer.
5. The charging indicator light on the robot should turn on, indicating that the robot is charging.
6. Allow the robot to charge completely. The exact charging duration may vary, so refer to the user manual for the recommended charging time.
7. Once the robot is fully charged, disconnect the charger from the robot and the power source.
Note: It is important to use the supplied charger or a compatible charger to avoid damaging the robot's battery. Overcharging the battery can also reduce its lifespan, so avoid leaving the robot connected to the charger for extended periods of time.
Add New Comment