User Manual Q&AAnswer
Dec 25, 2024 - 09:59 AM
To replace the tips on the MEKO 3-in-1 Stylus Pen, please follow these step-by-step instructions:
1. Unscrew the top part of the stylus pen. This is the section where the tips are located.
2. Remove the old tip by unscrewing it in a counterclockwise direction. Make sure to grip the tip firmly and twist it until it comes off.
3. Take the replacement tip that matches the type you want to use (disc or rubber) and xxxx it onto the stylus pen in a clockwise direction. Ensure that it is securely attached.
4. Repeat the process if you want to replace the other tip as well.
5. Once the new tip(s) is securely attached, you can start using the stylus pen with the new tip(s).
Note: It is important to use the correct replacement tip for the specific function you desire. The MEKO 3-in-1 Stylus Pen comes with two replacement tips: one fine point disc tip and one medium point rubber tip. Make sure to choose the appropriate replacement tip based on your needs.
If you have any further questions or need additional assistance, please refer to the user manual provided with the MEKO 3-in-1 Stylus Pen or contact MEKO customer support through the provided email address.
Add New Comment