User Manual Q&AAnswer
Dec 25, 2024 - 09:50 AM
To replace the tip on the OASO 1010B Magnet Cap Styli Pencil, please follow these steps:
1. Unscrew the end of the stylus: Hold the stylus firmly and twist the end counterclockwise to unscrew it. The end of the stylus is where the disc tip is located.
2. Remove the worn-out tip: Once the end is unscrewed, you will see the disc tip. Gently pull out the worn-out tip from the stylus.
3. Install the new tip: Take the replacement disc tip included in the package and align it with the opening in the stylus. Insert the new tip into the stylus until it fits securely.
4. xxxx the end back on: After replacing the tip, xxxx the end of the stylus back on by twisting it clockwise. Make sure it is tightened securely to prevent any loosening during use.
Note: It is recommended to replace the tip when it becomes worn or damaged to maintain optimal performance. The OASO 1010B Magnet Cap Styli Pencil includes a spare tip in the package for your convenience.
If you have any further questions or need additional assistance, please refer to the user manual or contact OASO's customer support for further guidance.
Add New Comment