User Manual Q&AAnswer
Dec 25, 2024 - 09:47 AM
To pair the BLEBLE 6WP-RC iPad Stylus Pen with your iPad, please follow these steps:
1. Ensure that Bluetooth is enabled on your iPad. You can do this by going to the Settings app and tapping on "Bluetooth." Toggle the switch to turn it on.
2. On the BLEBLE 6WP-RC iPad Stylus Pen, locate the power button. Press and hold the power button for a few seconds until the LED indicator light starts flashing.
3. On your iPad, navigate to the Bluetooth settings menu. It is usually found in the Settings app under "Bluetooth."
4. In the Bluetooth settings menu, you should see a list of available devices. Look for the BLEBLE 6WP-RC iPad Stylus Pen in the list and tap on it to initiate the pairing process.
5. Once you tap on the stylus in the Bluetooth settings, your iPad will attempt to pair with the stylus. Wait for the pairing process to complete. The LED indicator light on the stylus will stop flashing and remain solid when the pairing is successful.
6. After successful pairing, you should be able to use the BLEBLE 6WP-RC iPad Stylus Pen with your iPad. Test it by drawing or writing on the screen.
If you encounter any issues during the pairing process, make sure that the stylus is fully charged and within range of your iPad. Additionally, check that Bluetooth is turned on and that there are no other devices interfering with the connection.
For more detailed instructions, please refer to the user manual provided with the BLEBLE 6WP-RC iPad Stylus Pen.
Add New Comment