Answer
Dec 25, 2024 - 09:45 AM
To charge the KingsDragon 822 Remote Control Robot, follow these steps:
1. Unpack the Robot: Take out the packaging from the robot, the remote control, and any other accessories that came with it.
2. Charge the Robot: Connect the robot to a USB power supply using the included charging cable. Plug the USB end of the cable into a power source, such as a computer or a USB wall adapter. The robot's charging port is usually located on the back or underneath.
3. Verify Battery Level: For best results, make sure the robot is completely charged before using it for the first time. It takes approximately two hours to fully charge the robot.
4. Recharge as Necessary: After each play session, it is recommended to recharge the robot to ensure it is ready for the next use. The robot's rechargeable Lithium Polymer battery can provide 1.5 to 3 hours of music playback and standby for 15 to 30 days when fully charged.
Note: Make sure to use the provided charging cable and a compatible power source to avoid any damage to the robot's battery or charging port.
Add New Comment