User Manual Q&AAnswer
Dec 25, 2024 - 09:40 AM
To pair the remote control with the Sumsync YKZZ Remote Control Spider Robot, please follow these steps:
1. Ensure that both the remote control and the spider robot are turned on and within range of each other.
2. On the spider robot, locate the pairing button. It is usually located on the underside or near the power switch.
3. Press and hold the pairing button on the spider robot until the LED indicator starts flashing rapidly.
4. On the remote control, locate the pairing button. It is usually located on the back or side of the remote.
5. Press and hold the pairing button on the remote control until the LED indicator starts flashing rapidly.
6. Release both buttons and wait for a few seconds. The LED indicators on both the spider robot and the remote control should stop flashing and remain lit, indicating a successful pairing.
7. Test the remote control by using the directional buttons to move the spider robot. If the robot responds to the remote control commands, the pairing process is complete.
If you encounter any issues during the pairing process, please refer to the Sumsync YKZZ Remote Control Spider Robot User Manual for further troubleshooting steps.
Add New Comment