User Manual Q&AAnswer
Dec 25, 2024 - 09:26 AM
To pair the remote control with the CALOVER 787 Remote Control Spider, please follow these steps:
1. Ensure that both the spider and the remote control have fresh batteries installed.
2. Turn on the power switch located on the spider's underbelly.
3. Turn on the remote control by pressing the power button.
4. Verify that the remote control and the spider are within range of each other. The remote range is approximately 8-10 meters indoors and 5-8 meters outdoors in an interference-free environment.
5. If the spider does not respond to the remote control, try repairing them by following these steps:
a. Turn off both the spider and the remote control.
b. Turn on the spider first by flipping the power switch.
c. Press and hold the forward button on the remote control.
d. While holding the forward button, turn on the remote control by pressing the power button.
e. Release the forward button on the remote control.
f. The spider and the remote control should now be paired. Test the movements using the remote control.
If you are still experiencing issues with pairing or controlling the spider, please refer to the troubleshooting section of the CALOVER 787 Remote Control Spider user manual or contact the manufacturer, GLORY SHINE, for further assistance.
Add New Comment