User Manual Q&AAnswer
Dec 25, 2024 - 08:53 AM
To sync the remote control with the Top Race TR-122 Remote Control Dump Truck, please follow these steps:
1. Turn on the dump truck by pressing the "On" button located on the truck.
2. Turn on the remote control by opening the battery compartment and inserting two AA batteries.
3. Make sure the remote control is within range of the dump truck.
4. Test the forward, backward, left, and right movements on the remote control to see if the dump truck responds.
5. If the dump truck does not respond, try re-syncing the remote control by following these steps:
a. Turn off both the dump truck and the remote control.
b. Turn on the dump truck first by pressing the "On" button.
c. Within 5 seconds, turn on the remote control.
d. Test the movements on the remote control again to see if the dump truck responds.
6. If the dump truck still does not respond, refer to the troubleshooting section of the user guide or contact Top Race customer support for further assistance.
Note: It is important to ensure that the batteries in both the dump truck and the remote control are fully charged and properly inserted. Also, make sure there is no signal interference in the area that may affect the remote control's range.
Add New Comment