User Manual Q&AAnswer
Dec 25, 2024 - 08:40 AM
To sync the remote control with the Top Race TR-112S Dump Truck, please follow these steps:
1. Make sure both the truck and the remote control have fresh batteries installed.
2. Turn on the power switch on the truck. The power switch is usually located on the bottom or side of the truck.
3. On the remote control, locate the sync button. The sync button is usually labeled as "Sync" or "Pair" and is typically located on the front or top of the remote control.
4. Press and hold the sync button on the remote control for a few seconds until the LED indicator starts flashing.
5. While the LED indicator is flashing, press and hold the power button on the truck for a few seconds until the truck's LED indicator starts flashing as well.
6. Release both buttons and wait for a few seconds. The LED indicators on both the remote control and the truck should stop flashing and remain solid, indicating that they are now synced.
7. Test the basic movements (forward, backward, left, and right) on the remote control to ensure that the truck is responding correctly.
If the truck is still not responding to the remote control after following these steps, please refer to the troubleshooting section in the user manual or contact Top Race customer support for further assistance.
Add New Comment