User Manual Q&AAnswer
Dec 25, 2024 - 08:36 AM
To attach the POWERUP 500-002 Paper Airplane Conversion Kit to a paper airplane, follow these steps:
1. Unpack the Kit: Take the components of the conversion kit out of the packaging with care.
2. Choose a Paper Design: Either make your own or pick one of the provided examples for a paper airplane design.
3. Fold the Paper Airplane: Using the chosen design as a guide, fold your paper airplane as directed.
4. Attach the Propeller Shaft: Fasten your folded paper airplane's carbon fiber propeller shaft to the front.
5. Connect the Rear Propeller: Fasten the incredibly durable rear propeller to the propeller shaft's rear end.
6. Place Batteries: First, open the battery box and place three AA batteries inside, making sure the polarity indicators on the batteries are precisely aligned.
7. Turn on the electricity to turn on the motor and propeller in the kit.
8. Modify Propeller Alignment: For the best flying performance, make sure the propeller is centered and well-aligned.
9. Check for Balance: Gently hold your airplane to make sure it doesn't tip forward or backward to check its balance.
10. Conduct a Test Flight: To ensure the aircraft is stable during flight and to make any required alterations, gently launch it indoors.
11. Charge the Motor: You may give the motor a quick boost if needed by plugging it in for up to 20 seconds.
12. Reattach Components if Necessary: Tighten up any pieces that slipped loose during the test flight.
13. Get Ready for Outdoor Flight: Select a wind-free, open outdoor space for your flight.
14. Launch the Aircraft: Grab the aircraft by its body, take a small step back, and gently lift it into the sky.
15. Observe and Modify: To attain the intended flight route, observe the flying pattern and modify the wings or propeller as necessary.
For more detailed instructions and illustrations, please refer to the POWERUP 500-002 Paper Airplane Conversion Kit User Manual.
Add New Comment