User Manual Q&AAnswer
Dec 25, 2024 - 08:00 AM
To pair the Qukam 9th Generation Tilt Sensitive Stylus Pen with your iPad, please follow these steps:
1. Ensure that your iPad is turned on and unlocked.
2. Remove the cap from the stylus pen to reveal the tip.
3. Press the top button on the stylus pen to turn it on. You should see a small LED light indicating that the stylus is powered on.
4. On your iPad, go to the Settings app.
5. In the Settings menu, select "Bluetooth".
6. Make sure that Bluetooth is turned on.
7. On the Qukam stylus, press and hold the top button for a few seconds until the LED light starts flashing. This indicates that the stylus is in pairing mode.
8. On your iPad, under the "Other Devices" section, you should see the Qukam stylus listed. Tap on it to initiate the pairing process.
9. Once the pairing is successful, the LED light on the stylus will stop flashing and remain solid.
10. Your Qukam stylus is now paired with your iPad and ready to use.
Please note that the pairing process may vary slightly depending on your iPad model and operating system version. If you encounter any issues during the pairing process, refer to the user manual or contact Qukam customer support for further assistance.
Add New Comment