User Manual Q&AAnswer
Dec 25, 2024 - 07:48 AM
To pair the FOJOJO Q10-WH-1 iPad Active Capacitive Pen with your iPad, please follow these steps:
1. Ensure that your iPad is turned on and unlocked.
2. Enable Bluetooth on your iPad by going to Settings > Bluetooth and toggling the switch to the "On" position.
3. Remove the cap from the FOJOJO Q10-WH-1 pen to reveal the Type-C charging port.
4. Connect the pen to a power source using the provided Type-C charging cable. The switch indicator will light up to indicate that the pen is charging.
5. Once the pen is fully charged, press and hold the touch switch on the pen for about 5 seconds until the indicator light starts blinking.
6. On your iPad, go to Settings > Bluetooth and wait for the FOJOJO Q10-WH-1 pen to appear in the list of available devices.
7. Tap on the FOJOJO Q10-WH-1 pen in the Bluetooth devices list to initiate the pairing process.
8. Follow any on-screen prompts or instructions to complete the pairing process.
9. Once the FOJOJO Q10-WH-1 pen is successfully paired, the indicator light on the pen will stop blinking and remain solid.
10. You can now start using the FOJOJO Q10-WH-1 pen with your iPad. Simply touch the pen's tip to the iPad screen to interact with it.
Note: If you experience any issues with the pairing process, please refer to the troubleshooting section in the FOJOJO Q10-WH-1 iPad Active Capacitive Pen User Manual or contact FOJOJO customer support for further assistance.
Add New Comment