User Manual Q&AAnswer
Dec 25, 2024 - 05:26 AM
Changing the wax in the Dawhud Direct DH-592 Wall Plug-in Wax Warmer is a simple process. Here are the step-by-step instructions:
1. Ensure that the warmer is unplugged and cooled down before attempting to change the wax.
2. Remove the lid of the warmer by gently lifting it off.
3. Take out any remaining wax from the wax dish, if applicable. You can use a paper towel or a cotton ball to remove the wax residue.
4. Place the new wax melts of your choice into the wax dish. Be careful not to overfill the dish, as this can cause the wax to spill over when melted.
5. Replace the lid securely back onto the warmer.
6. Plug the warmer back into a wall outlet.
7. Turn on the warmer by flipping the switch or pressing the power button, depending on the model.
8. The bulb inside the warmer will start to heat up, melting the new wax and releasing the scent.
9. Enjoy the fresh scent in your space!
Remember to always follow the manufacturer's instructions and safety guidelines when using and changing wax in the Dawhud Direct DH-592 Wall Plug-in Wax Warmer.
Add New Comment