User Manual Q&AAnswer
Dec 25, 2024 - 05:11 AM
To change the light bulb in the VP Home CCW-009 Wall Plug-in Wax Warmer, please follow these steps:
1. Unplug the wax warmer from the wall outlet and allow it to cool down completely before proceeding.
2. Locate the light bulb socket on the top of the wax warmer. It should be visible once you remove the glass dish.
3. Gently twist the light bulb counterclockwise to remove it from the socket. Be careful not to apply too much force to avoid damaging the socket or bulb.
4. Take a new 25W, 120V electric light bulb of the same power and xxxx it into the socket by turning it clockwise. Ensure it is securely tightened.
5. Once the new light bulb is in place, replace the glass dish on top of the wax warmer.
6. Plug the wax warmer back into the wall outlet.
7. Turn on the wax warmer to test if the new light bulb is working properly. The light should turn on to indicate that the warmer is functioning correctly.
Note: It is recommended to use a light bulb of the same wattage and voltage as the original bulb to ensure proper functioning of the wax warmer.
Add New Comment