User Manual Q&AAnswer
Dec 25, 2024 - 04:35 AM
To clean the Dawhud Direct PI-A424 Electric Plug-in Wax Warmer, follow these steps:
1. Remove the plug before cleaning: Always make sure to unplug the warmer from the power source before cleaning or performing any repairs.
2. Let the wax cool: Allow the wax in the dish to cool and solidify before attempting to remove it. This will make the cleaning process easier.
3. Take off hardened wax: Once the wax has cooled, gently scrape off the hardened wax from the dish using a plastic scraper or a similar tool. Be careful not to scratch or damage the ceramic dish.
4. Wipe the dish: After removing the hardened wax, use a wet cloth or paper towel to wipe the dish clean. Make sure to remove any residue or leftover wax.
5. Change the bulb if necessary: If the light bulb needs to be replaced, ensure that the warmer is unplugged and the bulb has cooled down before removing it. Use a compatible 15W, 120V electric light bulb as a replacement.
6. Clean the exterior: To clean the clay body of the warmer, wipe it down with a soft cloth to remove any dust or fingerprints. Avoid using harsh cleaners that may damage the clay finish.
7. Store properly: When not in use, store the wax warmer in a dry place, away from water or moisture. This will help prevent any damage and ensure its longevity.
By following these cleaning instructions, you can maintain the Dawhud Direct PI-A424 Electric Plug-in Wax Warmer in good condition and ensure optimal performance.
Add New Comment