User Manual Q&AAnswer
Dec 25, 2024 - 04:15 AM
Cleaning the STAR MOON 17351-20A Electric Wax Melt Warmer is a simple process. Here are the steps to clean the unit properly:
1. Ensure the unit is off and unplugged before you start cleaning.
2. Once the wax has cooled and set, carefully remove any remaining wax from the ceramic dish. You can use a soft cloth or warm soapy water to clean the dish. Avoid using abrasive sponges or harsh chemicals, as they can damage the surface.
3. To clean the ceramic surface, use a microfiber cloth to wipe away any dust or dirt. Again, avoid using abrasive materials that can scratch the surface.
4. Periodically check the power cord for any damage or wear. If you notice any issues, replace the power cord to ensure safety.
5. If the incandescent bulb starts to dim or stops working, replace it with the free replacement bulb that came with the unit or a compatible incandescent bulb.
6. Do not submerge the unit in water to avoid damaging the electronics. Only clean the outside of the ceramic dish.
7. To prevent the unit from getting too hot, turn it off when not in use and avoid leaving it on for extended periods of time.
8. Store the wax melt warmer in a dry place, away from heat sources and extreme temperatures.
9. Before adding new wax, make sure to thoroughly clean the ceramic dish to remove any residue from previous melts.
By following these cleaning instructions, you can keep your STAR MOON 17351-20A Electric Wax Melt Warmer in good condition and ensure optimal performance.
Add New Comment