User Manual Q&AAnswer
Dec 25, 2024 - 03:38 AM
Setting up the MOKPR CA008 Wireless Car Charger in your car is a simple process. Here are the step-by-step instructions:
1. Take it out of the box: Remove the charger from the packaging and ensure that you have all the necessary components, including the charger mount, air vent clip, and any additional accessories.
2. Set up the mount: Connect the wireless charger to the air vent clip. Use the clips to securely attach the mount to the air vent in your car.
3. Connect power supply: To enable fast charging, plug the USB cable provided with the charger into the charger itself. Connect the other end of the cable to a QC 3.0 car charger (sold separately). This will provide the necessary power for fast wireless charging.
4. Place your phone in the charger: Once the charger is powered on, the arms and feet will automatically open and close. Simply place your phone in the charger, and the arms will securely hold it in place.
5. Check phone compatibility: Ensure that your phone is compatible with wireless charging and supports the 15W, 10W, 7.5W, or 5W charging options provided by the charger.
6. Turn on the charger: Once the charger is plugged in and powered on, it will start recognizing your phone and adjust the charging speed accordingly based on the phone model.
7. Adjust the viewing angle: The charger features a 360-degree rotating ball joint, allowing you to adjust the viewing angle for optimal visibility while driving. Rotate and pivot the charger to find the best position for your phone.
8. Enable wireless charging on your phone: Make sure that the wireless charging feature is turned on in your phone's settings. Once you place your phone in the charger, it should start charging wirelessly.
9. Ensure case compatibility: If you are using a phone case, ensure that it is not thicker than 4mm. The charger supports charging through cases up to this thickness.
10. Automatic alignment: The charger has a built-in sensor that automatically aligns your phone to the optimal charging area. There is no need to manually adjust the position of your phone.
11. Check the LED indicator: The charger is equipped with an LED light that indicates the charging status. Typically, a green or blue light indicates that the phone is charging.
12. Use while driving: Once everything is set up, you can safely use the charger while driving without the need to worry about wires or making manual adjustments.
13. Remove the phone: When you are finished using the charger, simply remove your phone from the mount. The arms will automatically open to release the phone.
14. Check charging speed: Verify that the charger is providing the correct power output (15W, 10W, or 7.5W) by checking the charging speed on your phone.
15. Adjust the mount if needed: If the charger is not securely holding your phone, try adjusting the angle of the mount or ensuring that the air vent clip is tightly attached.
By following these steps, you should be able to set up and use the MOKPR CA008 Wireless Car Charger in your car effectively.
Add New Comment