User Manual Q&AAnswer
Dec 25, 2024 - 03:31 AM
To pair the PALOVUE aptX Bluetooth Receiver with your device, please follow these steps:
1. Ensure that the receiver is in pairing mode. When powered on, the LED lights on the receiver will start flashing, indicating that it is ready to pair.
2. On your mobile phone or tablet, open the Bluetooth settings menu.
3. Enable Bluetooth on your device if it is not already enabled.
4. In the Bluetooth settings menu, click on the option to search for devices. Your device will start scanning for available Bluetooth devices.
5. Look for the device named "Palovue Linkflow" in the list of available devices and click on it to initiate the pairing process.
6. Once connected, the LED lights on the receiver will stop flashing and remain solid, indicating a successful pairing.
7. The PALOVUE aptX Bluetooth Receiver will automatically re-connect to your device the next time it is powered on.
Note: The pairing mode of the receiver lasts for only 3 minutes. If the LED lights enter slow flash standby mode, indicating that the pairing mode has ended, you will need to restart the receiver by powering it off and on again to enter pairing mode.
If you are still experiencing difficulties with pairing, it is recommended to reset the receiver by holding the power button for 10 seconds and then repeat the pairing process.
For further assistance, you can contact PALOVUE support via email at support@palovue.net or visit their website at www.palovue.com. They will be able to provide you with additional troubleshooting steps or guidance.
Add New Comment