User Manual Q&AAnswer
Dec 25, 2024 - 03:20 AM
To install the HELESIN HE-11 Patio Umbrella Light on your umbrella, please follow these step-by-step instructions:
1. Take the umbrella light out of its package and open the box.
2. Make sure you have four AA batteries (not provided) ready for installation.
3. Slide the cover open to reveal the battery slots inside the battery compartment.
4. Insert the four AA batteries into the compartment, ensuring they are polarized correctly (+/-).
5. Firmly close the battery compartment.
6. Determine the pole diameter of your umbrella (0.86 to 1.81 inches) to ensure compatibility.
7. Adjust the umbrella light's integrated clamp to fit the pole.
8. Slide the clamp onto the umbrella pole and tighten it by adjusting the clamp's grip to secure the light in position.
9. Alternatively, you can use the two hooks included to suspend the light from a tree, tent, or other suitable object.
10. To activate the light after installation, press the button. The first press will activate four LEDs in dim mode.
11. Press the button again to switch to 24 LEDs in Bright mode.
12. Press the button a third time to turn on all 28 LEDs in Super Bright mode.
13. Press the button to cycle through the different modes and adjust the brightness according to your preference.
14. Before using the umbrella or structure, make sure the light is securely fastened.
15. To remove the light from the pole or other structure, simply follow the installation instructions again.
Please refer to the user manual for visual illustrations and additional information on installation and usage.
Add New Comment