User Manual Q&AAnswer
Dec 25, 2024 - 02:46 AM
To change the color and brightness of the S SMIFUL 7.5-inch LED Aquarium Light, you can use the included remote control. Here's a step-by-step guide:
1. Make sure the light is plugged into a power source and turned on.
2. Point the remote control towards the light and ensure there is a clear line of sight between the remote and the light.
3. Press the "ON" button on the remote to turn on the light.
4. To change the color, press the "COLOR" button on the remote. Each press will cycle through the available 16 solid colors. Choose the color you desire by stopping at the desired color.
5. To adjust the brightness, press the "BRIGHTNESS" button on the remote. Each press will increase the brightness level. Keep pressing until you reach the desired brightness.
6. If you want to change the lighting mode, press the "MODE" button on the remote. Each press will cycle through the available 4 light modes. Choose the mode that suits your preference.
7. Experiment with different color combinations, brightness levels, and modes to create the desired lighting effect for your aquarium.
Note: The remote control operates using infrared (IR) technology, so ensure there are no obstructions between the remote and the light for proper functionality.
Add New Comment