User Manual Q&AAnswer
Dec 25, 2024 - 01:52 AM
To connect your smartphone to the AVIALOGIC Q10 Remote Control Helicopter's Wi-Fi network, please follow these steps:
1. Download the app: Using your smartphone, download the drone's relevant app from the app store.
2. Turn on the drone: Ensure that the drone is turned on and ready for pairing.
3. Enable Wi-Fi on your smartphone: Go to the settings on your smartphone and enable Wi-Fi.
4. Connect to the drone's Wi-Fi network: In the Wi-Fi settings on your smartphone, you should see the drone's Wi-Fi network listed. Select the network to connect to it.
5. Enter the password: If prompted, enter the password for the drone's Wi-Fi network. The password can usually be found in the user manual or on the packaging.
6. Open the app: Launch the app on your smartphone.
7. Connect to the drone: Within the app, there should be an option to connect to the drone. Tap on it to establish the connection.
8. Verify connection: Once connected, you should see a confirmation message or indicator within the app that the smartphone is successfully connected to the drone's Wi-Fi network.
If you are still experiencing difficulties connecting your smartphone to the drone's Wi-Fi network, please refer to the user manual for specific instructions or contact AVIALOGIC's customer service for further assistance.
Add New Comment