User Manual Q&AAnswer
Dec 24, 2024 - 11:31 PM
Installing the Jslinter FY-ST581807 Edison Light Bulbs is a simple process. Here are the step-by-step instructions:
1. Ensure that the power to the fixture is turned off before installing or replacing the bulbs.
2. Remove any existing bulbs from the fixture by gently unscrewing them in a counterclockwise direction.
3. Take one of the Jslinter FY-ST581807 bulbs and hold it by the base.
4. Align the threaded base of the bulb with the socket in the fixture.
5. Insert the bulb into the socket and rotate it clockwise until it is securely screwed in. Do not overtighten.
6. Repeat steps 3-5 for the remaining bulbs, ensuring that each bulb is securely installed.
7. Once all the bulbs are installed, turn on the power to the fixture and test each bulb to ensure they light up properly.
Note: If you are using a dimmer switch with the Jslinter FY-ST581807 bulbs, make sure the dimmer switch is compatible with incandescent bulbs and follow the manufacturer's instructions for dimmer switch installation.
For more detailed information on the installation process, please refer to the "Product Manual" included in the package.
Add New Comment