User Manual Q&AAnswer
Dec 24, 2024 - 11:25 PM
Installing the Toodour HU-XI-113 Solar Torch Flame Lights is a straightforward process. Here are the step-by-step instructions:
1. Identify the desired location: Choose the area in your outdoor space where you want to install the lights. Ensure that it receives ample sunlight during the day for optimal charging.
2. Assemble the lights: Take the solar torch lights out of the packaging and separate the individual units. Each unit consists of a light fixture and a stake.
3. Attach the stake: Insert the stake into the bottom of the light fixture. Make sure it is securely attached.
4. Position the lights: Place the lights in the desired location, inserting the stake into the ground. Alternatively, you can use the lights on a flat surface by attaching the stake to the provided extension poles.
5. Ensure proper sunlight exposure: Position the lights in an area where the solar panel on top of each light can receive direct sunlight. This will allow the lights to charge during the day.
6. Turn on the lights: Locate the touch switch on the light fixture. Tap the base of the light to activate the lights. They will automatically turn on at dusk and off at dawn.
7. Enjoy the ambiance: Once the lights are set up and turned on, you can enjoy the beautiful flickering flame effect they provide in your outdoor space.
Note: It is important to regularly clean the solar panels to ensure optimal charging efficiency. Use a soft cloth or brush to remove any dust or debris that may accumulate on the panels.
For more detailed instructions and safety information, please refer to the user manual provided with the Toodour HU-XI-113 Solar Torch Flame Lights.
Add New Comment