User Manual Q&AAnswer
Dec 24, 2024 - 11:08 PM
To pair the SYNCWIRE SW-XC653 Bluetooth Transmitter with your device, please follow these steps:
1. Ensure that the transmitter is in pairing mode. The LED display on the transmitter should show "bt" to indicate it is ready to pair.
2. Enable Bluetooth on your device (e.g., smartphone, tablet).
3. Search for available Bluetooth devices on your device's Bluetooth settings.
4. From the list of available devices, select "SW-XC653" to initiate the pairing process.
5. If prompted, enter the pairing code '0000' or '1234' to complete the pairing process.
6. Once the pairing is successful, the LED display on the transmitter will stop flashing and show a steady connection.
If you are still experiencing difficulties, please try the following troubleshooting steps:
1. Make sure that the transmitter is within the Bluetooth range of your device (typically up to 10 meters).
2. Check if your device supports Bluetooth connectivity.
3. Reset the transmitter by holding the multifunction button for 10 seconds until the LED light flashes rapidly. Then, try pairing again.
If the issue persists, please refer to the SYNCWIRE SW-XC653 Bluetooth Transmitter User Manual for further troubleshooting steps or contact SYNCWIRE customer support for assistance.
Add New Comment