User Manual Q&AAnswer
Dec 24, 2024 - 11:07 PM
To pair your phone with the MAKETHEONE 753940956714 Bluetooth Wireless Speaker, please follow these steps:
1. Make sure the speaker is turned on and in pairing mode. The speaker will automatically go into pairing mode when turned on.
2. On your phone, go to the Bluetooth settings. Enable Bluetooth if it's not already enabled.
3. In the Bluetooth settings, you should see a list of available devices. Wait for the MAKETHEONE 753940956714 Bluetooth Wireless Speaker to appear in the list. It may take a few seconds for the speaker to show up.
4. Tap on the speaker's name in the list to initiate the pairing process. Your phone will attempt to connect to the speaker.
5. Once the pairing is successful, you should see a notification or confirmation on your phone's screen. The speaker's LED indicator may also change to indicate a successful connection.
6. You can now start playing music or audio from your phone, and it will be streamed to the MAKETHEONE 753940956714 Bluetooth Wireless Speaker.
If the speaker doesn't show up in the list of available devices, try the following troubleshooting steps:
- Make sure the speaker is within range of your phone (up to 10 meters) and that there are no obstacles or interference between them.
- Restart both your phone and the speaker, then try the pairing process again.
- If you have previously paired the speaker with another device, make sure that device is not currently connected to the speaker. Disconnect or unpair any other devices from the speaker before attempting to pair with your phone.
- If the issue persists, refer to the user manual or contact MAKETHEONE's customer service for further assistance.
Add New Comment