User Manual Q&AAnswer
Dec 24, 2024 - 10:59 PM
Cleaning the NOTOC XCP-1000 Electric Burner is important to keep it in good condition and ensure optimal performance. Here are the steps to clean the burner:
1. Unplug the burner: Before cleaning, always make sure to unplug the burner from the power source to avoid any accidents.
2. Let it cool down: Allow the burner to cool down completely before cleaning. This will prevent any burns or injuries.
3. Remove the wax or oil: If there is any remaining wax or fragrance oil in the bowl, let it solidify and then remove it. You can use a spoon or a paper towel to scrape out the hardened wax or oil.
4. Wipe down the bowl: Use a soft cloth or paper towel dampened with warm water to wipe down the bowl. This will help remove any residue or leftover wax.
5. Clean the metal surface: Gently wipe down the metal surface of the burner with a dry cloth to remove any dust or fingerprints. Avoid using abrasive cleaners, as they may scratch the surface.
6. Clean the glass lid: Use a soft cloth or glass cleaner to clean the glass lid. Be careful not to apply too much pressure or use abrasive materials that could scratch the glass.
7. Check the power cord: Inspect the power cord for any signs of damage or wear. If you notice any fraying or exposed wires, it is recommended to replace the power cord for safety reasons.
8. Store in a safe place: Once the burner is clean and dry, store it in a cool, dry place away from direct sunlight. This will help prolong its lifespan and prevent any damage.
By following these cleaning instructions, you can maintain the NOTOC XCP-1000 Electric Burner in good condition and ensure its longevity.
Add New Comment