User Manual Q&AAnswer
Dec 24, 2024 - 10:50 PM
Adjusting the temperature on the JULIAQUA GUI Aquarium Heater is a simple process. Here are the steps to follow:
1. Power On the Heater: First, make sure the heater is fully submerged in the water. The heater should be installed in a stable position using the included suction cups. Make sure it is securely attached to the side of your aquarium.
2. Press the ‘SET’ Button: To adjust the temperature, press the ‘SET’ button on the digital control panel. This will allow you to modify the target temperature for your aquarium.
3. Increase Temperature: Each time you press the ‘SET’ button, the temperature will increase by 1°C. Keep pressing the button until the desired temperature is displayed on the screen.
4. Wait for Confirmation: Once the desired temperature is set, the heater will stop accepting adjustments after 3 seconds. The display will show the current water temperature, and the target temperature will be confirmed.
5. Heating Process: The heater will automatically begin heating the water. During this time, the red light will turn on to indicate that the heater is actively working to heat the water.
6. Automatic Shut-Off: When the water reaches the set temperature, the heater will automatically stop heating, and the red light will turn off, indicating that the temperature has been reached and maintained.
7. Monitor the Temperature: The heater will maintain the set temperature, and the display will continue to show the current temperature. If the temperature falls below the set level, the heater will turn back on to reheat the water.
By following these steps, you can easily adjust and maintain the desired temperature in your aquarium using the JULIAQUA GUI Aquarium Heater.
Add New Comment