User Manual Q&AAnswer
Dec 24, 2024 - 10:11 PM
Installing the Brightown ST64 Vintage Edison Light Bulbs is a straightforward process. Here are the step-by-step instructions:
1. Ensure the power is turned off: Before installing or replacing any light bulb, it is important to turn off the power to the fixture at the circuit breaker or by switching off the light switch.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully unscrew it counterclockwise and remove it from the socket.
3. Check compatibility: Make sure the Brightown ST64 Vintage Edison Light Bulbs are compatible with your fixture. These bulbs use an E26/E27 medium base, which is a standard size for most light fixtures.
4. xxxx in the new bulb: Take one of the Brightown ST64 bulbs and align the base with the socket. Gently insert the bulb into the socket and rotate it clockwise until it is securely in place. Do not overtighten, as this can cause damage to the bulb or fixture.
5. Turn on the power: Once the bulb is installed, you can turn the power back on at the circuit breaker or by flipping the light switch.
6. Test the bulb: Flip the light switch to ensure the Brightown ST64 bulb is working properly. It should illuminate with a warm, inviting glow.
Please note that these instructions are general guidelines, and it's always a good idea to consult the specific instructions provided in the user manual for your fixture. Additionally, if you are unsure or uncomfortable with the installation process, it is recommended to seek the assistance of a qualified electrician.
Add New Comment