User Manual Q&AAnswer
Dec 24, 2024 - 10:10 PM
Installing the HUDSON BULB CO. ST58 Dimmable Warm Lightbulbs is a simple process. Here are the step-by-step instructions:
1. Ensure the power is turned off: Before installing or replacing the bulb, make sure the power to the light fixture is turned off. This will prevent any electrical accidents.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully unscrew it counterclockwise and remove it from the socket. Set it aside for disposal or future use.
3. xxxx in the HUDSON BULB CO. ST58 bulb: Take the ST58 bulb and align the base with the socket. Insert the bulb into the socket and rotate it clockwise until it is securely fastened. Make sure not to overtighten the bulb.
4. Turn on the power: Once the bulb is installed, you can turn on the power to the light fixture. Use the light switch or any other control method to activate the bulb.
Please note that these instructions are general guidelines. For specific details and safety precautions, it is always recommended to refer to the user manual provided with the product.
Add New Comment