User Manual Q&AAnswer
Dec 24, 2024 - 10:03 PM
Installing the MASTERY MART MM-ST19 Vintage LED Edison Bulbs is a straightforward process. Here are the step-by-step instructions:
1. Ensure the power is turned off: Before installing or replacing any light bulbs, always make sure the power to the fixture is turned off. This will prevent any electrical accidents.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully unscrew and remove it from the socket.
3. xxxx in the MASTERY MART MM-ST19 bulb: Take one of the MASTERY MART MM-ST19 bulbs and align the base (E26) with the socket. Gently insert the bulb into the socket and rotate it clockwise until it is securely in place. Do not overtighten.
4. Repeat for additional bulbs (if necessary): If you have multiple bulbs to install, repeat step 3 for each bulb.
5. Turn on the power: Once all the bulbs are installed, turn on the power to the fixture. The MASTERY MART MM-ST19 bulbs should light up immediately, providing instant light without any warm-up time.
Please note that it is important to follow the safety precautions mentioned in the user manual, such as ensuring the fixture is compatible with the bulbs and avoiding overuse or improper handling. For any further assistance or troubleshooting, you can refer to the user manual or contact MASTERY MART customer service.
Add New Comment