User Manual Q&AAnswer
Dec 24, 2024 - 10:00 PM
Installing the ASOKO ST64A-4W LED Dimmable Edison Light Bulbs is a simple process. Here are the step-by-step instructions:
1. Make sure the power is turned off: Before installing or removing any light bulbs, always ensure that the power to the fixture is turned off at the circuit breaker or by switching off the wall switch.
2. Remove the old bulb: If there is an existing bulb in the fixture, gently twist it counterclockwise to remove it from the socket. Set the old bulb aside for proper disposal.
3. Prepare the ASOKO ST64A-4W bulb: Take the ASOKO ST64A-4W LED Dimmable Edison Light Bulb out of its packaging. Hold the bulb by the base and avoid touching the glass to prevent smudges or fingerprints.
4. Align the base: Align the base of the ASOKO ST64A-4W bulb with the socket in the fixture. The base of the bulb should have threads that match the socket.
5. Insert and twist: Insert the ASOKO ST64A-4W bulb into the socket and twist it clockwise until it is securely in place. Make sure the bulb is screwed in firmly but not too tightly.
6. Turn on the power: Once the bulb is installed, you can turn on the power to the fixture. If you have a dimmer switch, you can now adjust the brightness of the bulb to your desired level.
Please note that these instructions are general guidelines and may vary depending on the specific fixture or installation. Always refer to the user manual provided with the ASOKO ST64A-4W LED Dimmable Edison Light Bulbs for any specific instructions or precautions.
Add New Comment