User Manual Q&AAnswer
Dec 24, 2024 - 09:28 PM
To register your fingerprints on the GeekTale K13 Smart Door xxxx Lock, follow these steps:
1. Download and install the GeekTale app from the app store on your smartphone (available for iOS and Android).
2. Launch the app and follow the instructions to pair the lock with your device using Bluetooth.
3. Once the lock is paired, navigate to the fingerprint registration section in the app.
4. Place your finger on the fingerprint sensor located on the lock's exterior xxxx .
5. Hold your finger in place until the lock recognizes and registers your fingerprint. You may need to repeat this step multiple times for accurate registration.
6. Follow the on-screen prompts in the app to complete the fingerprint registration process.
7. Repeat the above steps for each fingerprint you wish to register, up to a maximum of 20 fingerprints.
Note: It is recommended to register your fingerprints in a well-lit environment and ensure that your finger covers the entire fingerprint sensor for accurate registration.
Source: https://manuals.plus/geektale/geektal... xxxx -lock-user-manual
Add New Comment