User Manual Q&AAnswer
Dec 24, 2024 - 09:20 PM
To change the mode on the DEWALT DCH273B Rotary Hammer Drill, follow these steps:
1. Locate the mode selector (D) on the tool. It is located near the trigger switch (B) and forward/reverse control button (C).
2. Rotate the mode selector to the desired mode. The tool has three modes: drill, rotary hammer, and chipping.
- For drilling, align the arrow on the mode selector with the drill bit symbol (J).
- For rotary hammer mode, align the arrow with the rotary hammer symbol (K).
- For chipping mode, align the arrow with the chipping symbol (L).
3. Make sure the mode selector is securely in place before operating the tool.
Please refer to the user manual for additional safety instructions and guidelines for each mode of operation.
Add New Comment