User Manual Q&AAnswer
Dec 24, 2024 - 08:58 PM
To change the speed of the Hi-Spec DT30902-US Electric Engraver Tool, follow these steps:
1. Locate the variable speed dial on the tool. It is usually located near the grip or handle.
2. Turn the speed dial to adjust the speed of the tool. The speed ranges from 8,000 to 35,000 RPM.
3. For slower speeds, turn the dial towards the lower numbers. For faster speeds, turn the dial towards the higher numbers.
4. Set the speed dial to the desired speed based on the requirements of your project.
5. Make sure the speed dial is securely in place before starting the tool.
Please refer to the user manual for more detailed instructions and safety precautions when using the Hi-Spec DT30902-US Electric Engraver Tool.
Add New Comment