How do I assemble the JUMMICO LJYMXLRP0 Power Lift Recliner Chair? (JUMMICO LJYMXLRP0 Recliner Chair Assemblely Instruction)

Answer

manuals.plus

Dec 24, 2024 - 08:28 PM

Assembly of the JUMMICO LJYMXLRP0 Power Lift Recliner Chair is straightforward and requires minimal effort. Here are the step-by-step instructions:

1. Start by inserting the backrest onto the seat. Gently push down until the backrest locks into position. Untie the cord at the bottom of the recliner.

2. Connect the plug line with the switching power line. Match the white wire with the white wire and the red wire with the red wire.

3. Repeat step 2 for the remaining plug line and switching power line connections.

4. Once the connections are secure, the recliner is finished assembling.

5. To open the recliner, use the controller provided.

6. To resume the recliner to its original position, use the controller.

7. To lift the recliner to the standing position, use the controller. This function supports the person standing up.

8. Use the controller to position the chair to your desired recline position.

Please note the warning included in the manual: Do not stand on this chair or use it as a step ladder. Use this chair for seating one person at a time. Ensure all bolts, screws, and knobs are firmly secured. Regularly check all bolts, screws, and knobs. Do not use the chair with damaged or missing parts. Failure to follow these warnings could result in serious injury.

For visual assistance, you can also refer to the provided video for the JUMMICO LJYMXLRP0 Power Lift Recliner Chair assembly process.

If you have any further questions or encounter any issues during assembly, please consult the instruction manual or contact the manufacturer's customer support for assistance.