User Manual Q&AAnswer
Dec 24, 2024 - 08:27 PM
To change the attachments on the Adedad PL10W Cordless Impact Wrench, follow these steps:
1. Select the desired attachment: Choose the impact drive socket or screwdriver bit that you want to use for your task.
2. Locate the output shaft: The output shaft is the part of the wrench where the attachments are connected.
3. Align the attachment: Align the attachment with the output shaft, making sure that the socket or bit is properly seated.
4. Insert the attachment: Push the attachment onto the output shaft until it clicks into place. Ensure that it is securely attached.
5. Test the attachment: Give the attachment a gentle tug to confirm that it is firmly connected to the wrench. It should not come loose during use.
6. Repeat for other attachments: If you need to change to a different attachment, simply repeat steps 1-5 for each new attachment.
Note: If you require a 1/4" socket, use the provided 1/2" to 1/4" adapter to ensure compatibility with the wrench.
For more detailed instructions and illustrations, please refer to the Adedad PL10W Cordless Impact Wrench User Manual that came with your product.
Add New Comment