User Manual Q&AAnswer
Dec 24, 2024 - 08:10 PM
To calibrate the ARB ARB510 Digital Tire Deflator, follow these steps:
1. Ensure the deflator is turned off.
2. Press and hold the power button for approximately 5 seconds until the display shows "CAL".
3. Release the power button and the display will show "0.0".
4. Connect the deflator to a known accurate pressure source, such as a calibrated tire gauge or air compressor with a pressure gauge.
5. Press the power button to increase the displayed pressure to match the known accurate pressure.
6. Once the displayed pressure matches the known accurate pressure, press and hold the power button for approximately 5 seconds to save the calibration.
7. The display will briefly show "CAL" to indicate that the calibration has been saved.
8. The deflator is now calibrated and ready for use.
For more detailed instructions and illustrations, please refer to the ARB ARB510 Digital Tire Deflator User Manual.
Add New Comment