User Manual Q&AAnswer
Dec 24, 2024 - 10:58 AM
To turn on the LED lights on the WEWILL YZTF0253 LED Light Up Panda, please follow these steps:
1. Unpack the panda: Take the LED panda out of its packaging and ensure there are no plastic or delivery items inside.
2. Find the button on the panda's hand: Look for the button on the panda's hand to activate the device. It might not be directly under the sticker, but somewhere around it.
3. Turn on the lights: Press the button to turn on the LED lights. The panda should start flashing brightly.
4. Set the timer (optional): The panda includes a pre-programmed 15-minute timer. After fifteen minutes of inactivity, the lights will automatically switch off to preserve battery life.
If the LED lights are not turning on, please check the following:
- Batteries: Ensure that the batteries are inserted correctly and have sufficient charge. If needed, replace the batteries with fresh AA batteries.
- Power switch: Make sure the power switch is in the "on" position.
If the issue persists, there may be a loose connection or wiring issue inside the toy. In such cases, it is recommended to contact customer service for further assistance or a possible replacement.
Add New Comment