User Manual Q&AAnswer
Dec 24, 2024 - 10:21 AM
To replace the cartridges in the Xyron 624632 Creative Station, please follow these step-by-step instructions:
1. Make sure the machine is turned off and the handle is in the down position.
2. Locate the cartridge compartment on the top of the machine. It is the area where the adhesive or laminating cartridge is inserted.
3. Press the release button or lever located on the side of the cartridge compartment. This will unlock the cartridge and allow you to remove it.
4. Carefully lift the used cartridge out of the compartment and set it aside.
5. Take the new cartridge and remove any protective packaging or seals.
6. Align the new cartridge with the compartment, making sure the arrows or indicators on the cartridge match the corresponding indicators on the machine.
7. Insert the new cartridge into the compartment, ensuring it is fully seated and locked in place. You may need to apply slight pressure to secure it.
8. Once the new cartridge is inserted, close the cartridge compartment by pushing it down until it clicks into place.
9. Turn on the machine and allow it a few seconds to initialize and recognize the new cartridge.
10. Your Xyron 624632 Creative Station is now ready to use with the new cartridge installed.
Please refer to the instruction manual for visual aids and additional information on cartridge replacement.
Add New Comment