User Manual Q&AAnswer
Dec 24, 2024 - 10:14 AM
To pair the remote control with the MIEBELY 29512 Remote Control Car, please follow these steps:
1. Ensure that both the car and the remote control are switched on. The car can be turned on using the switch located underneath it.
2. Make sure the battery in the car is properly charged and correctly installed. If the battery is low, recharge it fully before proceeding.
3. Install batteries in the remote control if they are not already in there. Follow the directions provided with the remote control for installing the batteries.
4. The MIEBELY 29512 Remote Control Car operates on a 2.4 GHz radio control system, which should establish a connection automatically. However, if the car and remote control are not paired, you may need to manually connect them.
5. Turn on the remote control and make sure it is within range of the car. The 2.4 GHz technology should establish a connection on its own.
6. Test the controls by pressing the left, right, forward, and backward buttons on the remote control. The car should respond accordingly to the commands.
If you are still experiencing issues with pairing the remote control with the car, please refer to the troubleshooting section of the user manual or contact the manufacturer, JIANFENGYUAN TOYS, for further assistance.
Add New Comment