User Manual Q&AAnswer
Dec 24, 2024 - 06:15 AM
To replace the adhesive cartridge in the , please follow these steps:
1. Open the cartridge compartment: Locate the cartridge compartment on the machine. It is usually located on the top or side. Press the release button or lift the cover to open the compartment.
2. Remove the empty cartridge: Once the compartment is open, carefully remove the empty adhesive cartridge. Take note of how it is positioned inside the compartment for reference.
3. Insert a new or refillable cartridge: Take a new adhesive cartridge or a refillable cartridge and align it with the guides inside the compartment. Make sure it is inserted in the correct orientation, following any arrows or markings on the cartridge.
4. Secure the cartridge: Push the cartridge firmly into the compartment until it clicks or locks into place. Ensure that it is securely seated and properly aligned.
5. Close the compartment: Close the cartridge compartment by pressing it down or sliding the cover back into place. Make sure it is fully closed and latched.
6. Test the machine: Turn the handle of the Xyron XRN250-Mini to feed the material through the machine. Check if the adhesive is being applied correctly and smoothly.
Note: If you are using a refillable cartridge, follow the instructions provided with the refill to ensure proper installation.
For visual reference, you can also refer to the user manual that comes with the Xyron XRN250-Mini Portable Sticker Maker Machine. It provides detailed instructions and illustrations on how to replace the adhesive cartridge.
If you encounter any difficulties or have further questions, please refer to the user manual or contact Xyron customer support for assistance.
Add New Comment