Answer
Dec 24, 2024 - 06:12 AM
Loading tape into the DYMO 12966 Embossing Label Maker is a simple process. Here are the step-by-step instructions:
1. Open the tape compartment: Locate the tape compartment on the side or bottom of the label maker. It may have a small latch or button to release the compartment.
2. Insert the roll of embossing tape: Take a roll of embossing tape and insert it into the tape compartment. Make sure the tape roll is positioned correctly and aligned with the feeding mechanism.
3. Close the compartment securely: Once the tape roll is inserted, close the tape compartment securely. Ensure that it clicks or locks into place to prevent the tape from coming loose during operation.
4. Verify tape alignment: After closing the compartment, check the alignment of the tape. Make sure it is properly positioned and threaded through the embossing mechanism.
5. Test the tape feed: Before using the label maker, test the tape feed by turning the embossing handle or pressing the embossing button. The tape should advance smoothly without any obstructions or misalignment.
Note: If you encounter any issues with tape loading or feeding, refer to the troubleshooting section of the user manual or contact DYMO customer support for further assistance.
Please refer to the user manual provided with your DYMO 12966 Embossing Label Maker for visual illustrations and additional information on tape loading.
Add New Comment