User Manual Q&AAnswer
Dec 24, 2024 - 05:06 AM
To change the batteries in the AYL Starlight 330 LED Camping Lantern, please follow these steps:
1. Make sure the lantern is turned off and remove any hanging or mounting attachments.
2. Locate the battery compartment on the bottom of the lantern.
3. Twist the bottom cap counterclockwise to open the battery compartment.
4. Remove the old batteries from the compartment, taking note of their orientation.
5. Insert three new D batteries into the compartment, ensuring they are correctly aligned with the positive (+) and negative (-) terminals.
6. Close the battery compartment by twisting the bottom cap clockwise until it is securely connected to the lantern.
7. Verify that the batteries are positioned firmly to ensure proper power flow.
8. Turn on the lantern to check if the new batteries are working properly.
Please refer to the "Setup Guide" section of the user manual for visual instructions and additional information.
Note: It is recommended to use fresh, high-quality batteries for optimal performance and longer battery life.
Add New Comment