User Manual Q&AAnswer
Dec 24, 2024 - 04:24 AM
Assembly instructions for the Giantex GT64114BK-HW Massage Wingback Single Sofa are included in the package. Here is a step-by-step guide to help you assemble the chair:
1. Unpack all the components and lay them out on a clean and spacious area.
2. Attach the legs to the bottom of the chair frame. The legs should align with the pre-drilled holes on the frame. Use the provided screws and an Allen wrench (if included) to secure the legs in place. Repeat this step for all four legs.
3. Connect the backrest to the seat frame. Align the backrest brackets with the corresponding slots on the seat frame. Insert the backrest into the slots and ensure it is securely attached.
4. Attach the armrests to the sides of the seat frame. Align the armrest brackets with the corresponding slots on the seat frame. Insert the armrests into the slots and make sure they are firmly attached.
5. Connect the power cord to the massage and heating control box located under the seat. Ensure that the connectors are securely plugged in.
6. Place the wired remote control in the designated holder on the side of the chair for easy access.
7. Once all the components are securely attached, carefully flip the chair upright.
8. Test the massage and heating functions using the remote control to ensure they are working properly.
Please refer to the assembly instructions provided in the package for any specific details or variations in the assembly process. If you encounter any difficulties or have further questions, you can contact Giantex customer service for assistance.
Add New Comment