User Manual Q&AAnswer
Dec 24, 2024 - 04:10 AM
Changing the accessories on the Hi-Spec DM-170 Rotary Tool Kit is a simple process. Here are the step-by-step instructions:
1. Ensure that the tool is unplugged before changing accessories to avoid accidents.
2. Locate the collet at the front of the tool. The collet is the part that holds the accessories in place.
3. Select the appropriate collet size (1.5mm, 2.3mm, or 3.2mm) for the accessory you want to use. The collet size should match the shank diameter of the accessory.
4. Insert the collet into the chuck by aligning the flat sides of the collet with the flat sides of the chuck. Push the collet in until it is fully seated.
5. Choose the accessory you want to use, such as a sanding band or grinding stone.
6. Insert the accessory into the collet and tighten it down by turning the collet nut clockwise. Make sure the accessory is securely fastened.
7. To remove an accessory, loosen the collet nut by turning it counterclockwise. Remove the accessory from the collet.
8. Repeat these steps for each accessory you want to use, ensuring that the collet is properly inserted and tightened for each one.
Remember to always use the appropriate safety precautions when changing accessories and using the rotary tool. Refer to the owner's manual for additional safety guidelines and usage instructions.
Add New Comment