User Manual Q&AAnswer
Dec 24, 2024 - 04:05 AM
Calibrating the Neoteck NTK120 Electronic Digital Dial Indicator is an important step to ensure accurate measurements. Here is a step-by-step guide on how to calibrate the dial indicator:
1. Start by setting the dial indicator to zero. Press the zero button to reset the reading to 0.0.
2. Find a known standard or reference object with a precise measurement. This could be a calibrated block or a known measurement tool.
3. Place the reference object on a stable surface.
4. Position the dial indicator's probe against the reference object, ensuring that it is in contact with the surface.
5. Read the measurement displayed on the LCD screen of the dial indicator.
6. Compare the measurement displayed on the dial indicator with the known measurement of the reference object. If there is a difference, note the deviation.
7. Adjust the calibration of the dial indicator by using the calibration xxxx or xxxx , if available. Refer to the instruction manual for specific instructions on how to adjust the calibration.
8. Repeat steps 3 to 7 until the measurement displayed on the dial indicator matches the known measurement of the reference object.
9. Once the calibration is complete, the dial indicator is ready to be used for accurate measurements.
Note: It is recommended to periodically check the calibration of the dial indicator to ensure ongoing accuracy.
Add New Comment