User Manual Q&AAnswer
Dec 24, 2024 - 03:48 AM
To change the distance display unit on the Nikon ACULON AL11 Hunting Rangefinder, follow these steps:
1. Turn on the power of the rangefinder and confirm that the internal display is active.
2. Press and hold the MODE button for more than two seconds. The display unit will be switched.
3. Release the MODE button after the unit has been set.
4. After the unit is set, the results will be converted and displayed in the selected distance display unit (yards or meters).
Please note that the factory default setting is yards, so you will need to switch it to meters if you prefer that unit of measurement.
Add New Comment